LPC236x_DevMaster Board

Now also my fourth DevMaster is finished. Again with a 32bit processor with ARM7 core.
Now the SAM7XCxx_DevMaster and the LPC236x_DevMaster can be used for direct compares between this two. Like already with the previous DevMaster-boards probably remained due to the interface desires and compactness again only 'do-it-yourself'.
The result is in the following specified.

Technical data:

  • NXP LPC236x CPU (LPC2364 ... LPC2368)
  • 12.000 MHz
  • 32.768 kHz for RTC
  • USB 2.0 full-speed Device
  • Ethernet 10/100M by National DP83848 plus PulseJack J1011F01
  • ARM7-JTAG Interface
  • MMC/SD-Card Slot using MCI
  • VBAT control
  • Header-pinning with USB / CAN / MMC-SD / SPI / SSP / I2S / I2C / UART1 / UART3 /
        PWM / PCK / CAP & NRST or all as PIOs
  • Power supply by header-pin or by USB


    • LPC236x_DevMaster -Sheet (as PDF)
    LPC236x_DevMaster -Sheet (as PDF)

    LPC236x_DevMaster -pinout
    LPC236x_DevMaster -pinout

    LPC236x_DevMaster -Board
    LPC236x_DevMaster -Board


    The produced Header-pinning puts thus up to the Ethernet-interface all further pins of the MCU at the free disposal. And so all pins (up to the two USB pins P0.29 & P0.30) can be used as desired as PIOs or UART,CAN,SPI,I2C,I2S, SSP,PCK,PWM,CAP... for own ideas.